Get quote

1,000 running feet of boundary wall, up in 2 to 3 days.

AR Precast casts prestressed wall panels at our Lucknow plant and installs them on your site at 350 to 500 RFT a day. No curing water, no trench, no plaster.

Precast boundary wall elevation with slotted posts, stacked panels and auger-drilled post holes
Boundary wall elevationSchematic view, not to scale
Panels50 / 65 / 80 mm
ConcreteM-30 to M-35
350 to 500 RFTinstalled per day
1400 MPaPC wire stress, 3 and 4 mm
150 x 150 mmslotted RCC posts
5 to 10 ftwall heights

What will your boundary cost?

Enter the wall length and your site zone. You get the precast cost, the same wall in 9-inch brickwork, and how long each takes.

Indicative estimate excluding GST. Brickwork benchmark is 1.68 times the precast base rate and covers bricks, sand, cement mortar, two-coat plaster, labour and 14 days of curing water.

Your estimate

Enter your wall length to see the estimate.

Products

Everything is cast in our Lucknow plant from factory-controlled concrete and delivered with installation.

Panels slide into slotted posts

Precast prestressed boundary walls

Tongue-and-groove interlocking panels slide into slotted RCC posts. No site curing, no plaster, and the wall can be moved later.

  • Heights 5, 6, 7, 8 and 10 ft
  • Panels 50, 65 and 80 mm thick
  • Posts 150 x 150 mm slotted reinforced concrete
  • 3 mm and 4 mm high-tensile PC wire (TATA / Jindal) stressed to 1400 MPa
  • M-30 to M-35 high early strength concrete

IS 1343:2012, IS 456:2000, IS 10262:2019, IS 516

up to 14 ft clear span No centre shutteringM-35 vibrated dense concrete

Prestressed floor and roof slabs

Factory-made slabs that span up to 14 ft without centre shuttering and carry load from day 1.

  • M-35 vibrated dense concrete
  • Spans up to 14 ft unsupported
  • Immediate load-bearing once laid

IS 1343:2012, IS 456:2000, IS 10262:2019, IS 516

20 to 40 ton axle load Flow

Heavy-duty drain covers and box culverts

Reinforced concrete covers and culverts designed for vehicles, for industrial parks, warehouse yards and roads.

  • Designed for Class AA, 20-ton to 40-ton wheel axle loads
  • Cast in the plant, delivered ready to place
  • Custom sizes to your drain width

IS 456:2000, IS 516

Road Footpath Hydraulic pressed kerb stone

Hydraulic pressed kerb stones

Dense, uniform kerb stones pressed under heavy hydraulic force for roads, industrial parks and plotted colonies.

  • Heavy-duty hydraulic pressing
  • Supplied across Lucknow, Barabanki and Unnao

IS 15658

Our manufacturing plant

See where your panels are made. Plant visits can be arranged during plant hours.

Where we have installed

Recent boundary walls, slabs and civil work delivered by AR Precast.

Precast vs a 9-inch brick wall

Six differences that decide cost, schedule and how long the wall lasts.

ParameterAR Precast wall9-inch brick wall
Finished cost per RFT (6 ft wall)₹75 to ₹95₹140 to ₹170
Time for 1,000 RFT2 to 3 days25 to 35 days
Water and electricityZero site curingDaily water tankers for 14 days
FoundationAuger-drilled post holesContinuous 3 ft trench
Reusability100% relocatable panels100% loss on demolition
Structural qualityM-35 factory-cured vibrated concreteHand-mixed mortar, prone to efflorescence (shora)

Days to finish 1,000 RFT

Precast2 to 3 days
Brickwork25 to 35 days

Indicative figures excluding GST. Taller walls cost more on both sides; use the calculator for your height and location.

How installation works

Panels arrive finished, so the work on your site is measuring, drilling and fitting.

  1. Site surveyBoundary length, corners, gates and levels are confirmed.
  2. Post holesAuger-drilled holes at each post position. No continuous trench.
  3. Posts150 x 150 mm slotted posts are aligned and fixed.
  4. PanelsTongue-and-groove panels slide into the slots.
  5. FinishingGate openings and optional Y-angle barbed wire.

Standards we build and test to

Cube test reports for your batch are available on request.

IS 1343:2012Prestressed concrete, code of practice
IS 456:2000Plain and reinforced concrete
IS 10262:2019Concrete mix design
IS 516Compressive strength testing of cubes
IS 15658Precast concrete kerb stones

Where we deliver and install

Supplied from our Lucknow plant. The delivery charge per running foot is built into the calculator.

Questions we get asked

What is the rate of a precast boundary wall per running foot?

Our base rate runs from ₹72 to ₹135 per RFT depending on height, plus ₹12 per RFT for a Y-angle barbed wire extension. Rates exclude GST and delivery to your zone. Use the calculator for an instant estimate.

How fast can a precast wall be installed?

With our crew, 350-500 running feet per day. A 1,000 RFT boundary typically takes 2-3 days, compared with roughly 25-35 days for brickwork including curing.

Does the site need water or electricity?

No. Panels are cured at the factory, so there is no site curing, plastering or tanker water.

Can the wall be shifted later?

Yes. Panels and slotted posts can be dismantled and reused at a new location.

Which areas do you supply?

Lucknow, Kanpur Road, Shaheed Path, Kursi Road, Sultanpur Road, Barabanki and Unnao.

How do I get a formal quotation?

Send the request form with your site location, scope and target delivery date, or message us on WhatsApp. Our plant dispatch team responds as quickly as possible during plant hours.

Request a quotation

Send your site details and drawings. Our plant dispatch team contacts you as quickly as possible during plant hours, Monday to Saturday, 9 am to 6 pm.

WhatsApp